Features and Specifications

• Available sizes: 7 tubes up to 73 tube connectors
• Pressure ratings of 50 psi up to 500 psi
• Ideal for making/breaking leak tight pneumatic connections
• Typical tube sizes: 0.040, 0.063, and 0.125 inch tubulations

Application
These high density connectors are extremely useful in wind tunnel models or flight tests when you have a large quantity of tubes requiring easy disconnects. These connectors consist of a male and female connector. Some models have Female Bulkhead (FB) and Female Sealing Bulkhead (FSB) connectors are available that can be panel mounted. Most of these connectors are constructed from Anodized aluminum bodies and stainless steel tubulations cemented using epoxy. Silicone gaskets are typical, however some connectors use a gascage with one o-ring per port. Based on chemical compatibility with your application, optional Viton or neoprene gaskets or o-rings are also available with some connectors. All of the Scanivalve circular connectors are designed for use with Scanivalve’s plastic tubing.

Overview
Scanivalve offers a complete line of circular pneumatic connectors to fit all locations and applications. These pneumatic connectors are idea for making and breaking multiple pneumatic connections with the satisfaction that a leak tight seal will be made. The smallest is a 7 tube connector (.345 inch diameter) and the largest up to 73 tube connector (1.250 inch diameter). Some circular connectors support pressures up to 500 psi.