Features and Specifications

***DISCONTINUED*** For a suitable replacement, please see the ECM4000

• Inteligent control pressures
• Supplies Control pressures for DSA3000/3200 series pressure scanners
• Ethernet TCP/IP protocol “Network Ready”

Application

The model ENETCPM is designed to supply 90 – 125 psi control pressures to Scanivalve’s DSA series pressure modules. These modules include DSA3017, DSA3018, DSA3217, and DSA3218. The DSA series products default to the operate (sense) mode without any control pressure. Ninety psi control pressure (125 psi when measuring pressures over 500 psi) is required to place the DSA pneumatic calibration valve in either the calibrate, purge or isolate mode. The ENETCPM communicates on the same Ethernet network as the DSA pressure modules and uses the same power supply. This eliminates the need for user supplied solenoid valves with analog operation. There are a total of 8 digital circuits. Three are used for the internal solenoid valves, and 5 additional are available for the user. These additional circuits can be used for lights, switches, valves, etc.

Overview

The Model ENETCPM Ethernet Control Pressure Module is an Intelligent module containing 3 each solenoid valves. It is designed to supply control pressures on demand to the DSA3000/3200/3300 series pressure modules. It also can supply pneumatic pressures or relay logic for other customer applications that are non-DSA related. Communication to the ENETCPM is Ethernet TCP/IP 10baseT using ASCII commands.  Each solenoid valve can be operated independently or as part of a group. The internal solenoid valves are pilot operated leak tight valves powered by 24Vdc. They are field replaceable with minimum downtime. There are a total of 8 digital circuits.