Discontinued – Please see legacy product information, or DSA5000 for suitable replacement.
Features and Specifications
- +/- .05% full scale long term accuracy (typical)
- 850Hz/channel sampling speed
- Multiple pressure ranges available per DSA
- Vacuum, 5 inch H20 up to 750 psi pressure range
- Auto zero offset correction
- IEEE 1588-2008v2 PTP Compliant
- Drop-in replacement for DSA3200 series scanners
Application
Overview
The DSA3200-PTP series pressure systems represent the next generation of multi-point electronic pressure scanning. The DSA3217-PTP Digital Sensor Array, incorporates 16 temperature compensated piezoresistive pressure transducers with a pneumatic calibration valve, RAM, 16 bit A/D converter, and a microprocessor in a compact self contained module. The result is a network-ready Ethernet pressure scanning module.
The microprocessor compensates for temperature changes and performs engineering unit conversion. The microprocessor also controls the actuation of an internal calibration valve to perform on-line zero and multipoint calibrations. This on-line calibration capability virtually eliminates sensor thermal errors with a long term system accuracy of ±.05% FS (5 psi & up).
Pressure data is output in engineering units via Ethernet using TCP/IP, UDP or FTP protocol.
Scanivalve offers an optional multi-range calibration. This allows the DSA modules to have multiple pressure ranges. The calibration valve and transducers are manifolded in groups of 8. The user can specify up to 3 pressure ranges within that group of 8 as long as the ratio for all 3 full scale ranges doesnt exceed 3:1 from highest to lowest range.
For more information on the differences between the legacy DSA3200 series and the DSA-PTP series, feel free to review the DSA-PTP White Paper that is located under the Downloads section on this page.
Downloads
- DSA3217-PTP Data Sheet (942.5 KB)
- DSA3217-PTP Manual (2 MB)
- DSA-PTP White Paper (2.1 MB)
- DSA Series Quickstart Guide (207.3 KB)
- DSA3217-PTP 3D Models (4.1 MB)