Features and Specifications
- Part number SLNT2 is a 8mL bottle of sealant
- Seals Plastic tubing to steel tubulations
- Each bottle will typically make 2,000-3,000 connections
Application
The use of sealant on tubing connections in conjunction with helical spring clamps is recommended for pressures above 250 psi. Brush the sealant lightly over the bulge of the stainless steel tubulation (TUBN). Then drive the plastic tubing with its helical spring clamp onto the tubulation.
The use of sealant on tubing connections in conjunction with helical spring clamps is recommended for pressures above 250 psi. Brush the sealant lightly over the bulge of the stainless steel tubulation (TUBN). Then drive the plastic tubing with its helical spring clamp onto the tubulation.
Overview
The use of sealant with Nylon tubing helical clamps (NYCLMP) is recommended for pressures above 250 psi.
The use of sealant with Nylon tubing helical clamps (NYCLMP) is recommended for pressures above 250 psi.
Photos
Downloads
- Sealant (SLNT2)
(301 KB) - Scanivalve Accessory Catalog (8 MB)
- Tubing Installation Guidance (128 KB)