Features and Specifications
- IEEE1588 v2 time synchronization
- Real Time Operating System using Digital Signal Processing
- Accepts type E,J,K,N,R,S,T, and B
- Engineering Unit output, °C, °F, °R, °K and mVolts
- 1000 Vdc channel-to-channel isolation
- 600 Vdc input isolation
- 160dB, 0-60Hz Common Mode Rejection
- 50-60Hz common mode noise rejection
- Open Thermocouple test
- 20 Hz maximum (Hz/channel)
- Ethernet 100 baseT TCP/IP protocol “network ready”
- Accuracy +/- .5 °C (limited thermocouple types)
Application
Overview
Legacy CompatibilityThe DTS4050 replaces the model DTS3250. Its software is backward compatible to existing DTS data systems; therefore, DTS3250 and DTS4050 modules can operate on the same network, and communicate with the same controlling software.Model DTS4050/32Tx, Digital Temperature Scanner, accepts 32 thermocouple inputs. It incorporates RAM, Integral Low Pass Filters, 22 bit A/D converters, and a microprocessor, in a rugged stand alone module. An isothermal block is incorporated for the Uniform Temperature Reference (UTR) for each 32 channel input. NIST thermocouple tables for standard thermocouple types are stored in flash memory. The microprocessor uses these look-up tables to convert mV inputs to Engineering Units. Temperature data are output in °C, °F, °R, K, millivolts and counts.
The DTS4050 accuracy for types E, J, K, N, and T is ± .5°C to ±2.0°C depending on the thermocouple type and the useful temperature range. Multiple standard thermocouple types may be used with one intelligent thermocouple scanner, Model DTS4050.
Downloads
- DTS4050 Data Sheet
(749.3 KB) - DTS4050 Manual
(2.6 MB) - DTS measurement uncertainty
(1.1 MB) - Grounding-shielding Scenarios
(310.4 KB) - DTS4050/32Tx 3D Model
(28 MB)

