The DSA5000 intelligent pressure scanner is the most configurable and versatile scanner in Scanivalve history, developed specifically to meet a wide range of applications. To further expand the use-cases, several new configurations and features have been added to make the DSA5000 the most diverse pressure measurement device available.

iDDS Communication Option

The DSA5000 is now available with a new communication option: iDDS. iDDS stands for ‘instrumentation Data Distribution Service’ and was initially defined by Rolls Royce. Since initial development, it has become open sourced, accepted and recognized by many gas turbine and jet engine developers. Scanivalve has partnered with MDS Aero Systems for the iDDS development, and we are now compliant with their NxDAS software platform which is widely used and accepted in this industry. More information on iDDS can be found here: iDDS. Information through MDS Aero can be found here: MDS AERO.

DSA3200 Emulator Software

To help the transition from the long-standing DSA3200 series to the new DSA5000 scanner, an embedded DSA3200 emulator has been added to the native DSA5000 operating firmware. This emulator was designed for the DSA5000 to communicate and output data similar to a DSA3200. This allows legacy software platforms developed around the DSA3200 to configure and collect data from a DSA5000 without needing to modify software code. The emulator is available in versions 1.08 and higher of the DSA5000. A white paper discussing the replacement of a DSA3200 with a DSA5000 and the utilization of the DSA3200 emulator software can be found on the DSA5000 web page, or directly through this link.

More details on these new features and configurations can be found on the DSA5000 web page, the DSA5000 Data Sheet, and in the DSA5000 User Manual. All available configurations are now available in the DSA5000 Part Number Generator on the DSA5000 web page.

Scanivalve will be participating in this year’s ASME Turbo Expo 2024 in London! We can be found at booth 314 between June 25-27. Please stop by for a quick hello and a conversation about pressure and temperature measurement solutions.

For those who stop by, we will be discussing different ways that Scanivalve measurement devices and accessories can help in various applications. We will have a demonstration setup to show the ease and simplicity of data collection from our new DSA5000 Pressure Scanner and DTS4050 Temperature Scanner.

For more information, or to register for the ASME Turbo Expo, please visit – https://event.asme.org/trubo-expo

We hope to see you there!

Scanivalve would like to wish everyone a joyful holiday season. We hope that everyone was able to navigate through 2023 with health, happiness, and accurate data.

Scanivalve will be closed Saturday, December 23rd through Monday, January 1st. We will do our best to respond to all inquiries when we return to the office on Tuesday, January 2nd, 2024.

Here’s to better times ahead for all – wishing you a very happy Holidays and a safe and healthy 2024.

Scanivalve is pleased to announce its new, exclusive partnership with EvoMestec, the authorized distributor for Scanivalve products in the DACH (Germany, Austria, Switzerland) region.

EvoMestec is uniquely qualified to offer sales, service and support for all Scanivalve products. By teaming up with EvoMestec, Scanivalve aims to provide the best solutions to the broad range of industries in the DACH region, including aerospace, automotive, energy, and manufacturing.

“We are excited to collaborate with EvoMestec as our exclusive distributor in the DACH region,” said Addison Pemberton, President at Scanivalve. “EvoMestec’s expertise, combined with their commitment to customer satisfaction, aligns perfectly with our values. This partnership will enable us to bring our superior products and solutions closer to our DACH customers.”

EvoMestec is equally enthusiastic about this partnership. “We are proud to represent Scanivalve, a company renowned for its excellence in pressure and temperature measurement technology,” said Bernd Clarenz, Director at EvoMestec. “Our team is dedicated to delivering the highest-quality measurement solutions to our customers, and with Scanivalve’s product portfolio, we can offer an even broader range of cutting-edge solutions to meet the unique needs of industries in the DACH region.”

For inquiries about Scanivalve’s products and services in the DACH region, please contact EvoMestec at info@evomestec.de or call +49 162 3340134. You can find more details about EvoMestec by clicking here.

Scanivalve will be participating in this year’s ASME Turbo Expo 2023! We will have a booth set up in Boston between June 27-29. Please stop by for a quick hello and a conversation about pressure and temperature measurement solutions.

For those who stop by, we will be discussing different ways that Scanivalve measurement devices and accessories can help in various applications. We will have a demonstration setup to show the ease and simplicity of data collection from our new DSA5000 Pressure Scanner and DTS4050 Temperature Scanner.

For more information, or to register for the ASME Turbo Expo, please visit – https://event.asme.org/trubo-expo
You can use the code below to get free admission to the exposition portion of the show.

We hope to see you there!

Scanivalve has been partnered with Mensor LP for many years to produce and support the SPC4000 series of Pressure Calibrators. The SPC4000 is an OEM custom adaptation of the Mensor APC600/CPC6000 to suit Scanivalve customer’s specific needs. As of 12/31/2023, Mensor is ending software and hardware support for the APC600, CPC6000 and SPC4000 series Pressure Calibrators. As such, Scanivalve will be categorizing the SPC4000 as ‘End of Life’ beginning 12/31/2023.

The SPC4000 was replaced by the SPC4050 in early 2019. The SPC4050 is the recommended replacement for the SPC4000 as it includes improvements to many of the functions found in the SPC4000. Additionally, the SPC4050 is compatible with most SPC4000 pressure transducers.

If you have any questions about this notice, please contact us at: techsupport@scanivalve.com

To read the official Scanivalve and Mensor SPC4000 notice, follow this link: Click Here!

Around one year ago, Scanivalve released a new miniature pressure scanner – the MPS4232. Thanks to valuable customer input, we are excited to announce expanded pressure measuring capabilities in our MPS4232 pressure scanner. We are now offering the MPS4232 scanner in pressure ranges up to 100psid- which is a 2x improvement from our previous offering.

The new 100psid pressure range utilizes a new sensor die which is incredibly stable, repeatable, and accurate. Utilizing our proprietary calibration routine, this new sensor has proven that it can easily maintain an accuracy of 0.06% F.S. or better across the calibrated range of the sensor (0-70°C).

With the addition of the 100psid sensors in the MPS4232, we are now also able to offer custom calibrated ranges between 50psid and 100psid to suit specific measurement needs.

Scanivalve continues to expand our product line to support our users worldwide. The improved pressure range offering in the MPS4232 is an excellent example how we can leverage our vast experience to design and update products that allow users to easily expand and maximize the capabilities of their Scanivalve pressure measurement systems.

If you have any questions about the MPS4232, or any Scanivalve products, please reach out to us! More information on the MPS4232 can be found on our website: Click Here!

Scanivalve would like to wish everyone a joyful holiday season. We hope that everyone was able to navigate through 2022 with health, happiness, and accurate data.

Scanivalve will be closed Saturday, December 24th through Monday, January 2nd. We will do our best to respond to all inquiries when we return to the office on Tuesday, January 3rd, 2023.

Here’s to better times ahead for all – wishing you a very happy Holidays and a safe and healthy 2023.

Scanivalve is excited to announce a brand-new product: the MPS4232 – Miniature Pressure Scanner. The MPS4232 miniature pressure scanner represents the forefront of pressure measurement technology. It has been designed from the ground up with size, accuracy, speed, and functionality in mind. This new scanner boasts 32 discrete pressure channels, a small footprint, TCP/IP Ethernet connectivity, an A/D per channel, synchronous scanning, and a wealth of other innovative features. 

The MPS4232 electronics are designed around a high performance dual-core processor which can produce engineering unit data for 32 pressure channels synchronously at rates in excess of 850Hz (samples per channel per second). Onboard flash memory stores the pressure-temperature matrix that allows for the conversion of RAW 24-bit A/D counts to precise engineering unit data over a wide operating temperature (0-70°C).

The MPS4232 makes communications simple by including an integral web server and supporting a wide variety of standard Ethernet communication protocols. The MPS4232 also supports IEEE1588v2 Precision Time Protocol: an Ethernet based, time synchronization method. Leveraging this technology allows the user to synchronize multiple MPS units, or other devices that support IEEE1588v2, to sub-microsecond resolve.

Scanivalve continues to expand our product line to support our users worldwide. The MPS4232 is an excellent example how we can leverage our vast experience to design products that allow users to easily expand and maximize the capabilities of their Scanivalve pressure measurement systems.

If you have any questions about the MPS4232, or any Scanivalve products, please reach out to us! More information on the MPS4232 can be found on our website: Click Here!

The latest software release for the DSAENCL4000 allows for IEEE-1588 v2 Precision Time Protocol (PTP) compatibility. PTP compatibility includes the ability for the DSAENCL to act as a PTP master and serve the time to other compatible Scanivalve devices, or act as a PTP slave and get the time from a PTP Grandmaster or other master device. This enables users to synchronize their scan data between their DSAENCL and other PTP compliant devices.

Some older DSAENCL4000 hardware may not support the PTP firmware update. Please contact Scanivalve if you have questions about your DSAENCL4000 and hardware.

To view more information on the DSAENCL and PTP, please visit the DSAENCL webpage and review the DSAENCL4000 Hardware and Software manual. For the firmware file to update your ENCL, please contact us!